
The material used for the mold of the concrete inspection well is green and environment-friendly, so as to help the manufacturer embark on the road of energy conservation and sustainable development. When the mold is used, it is an important infrastructure for connecting underground pipelines and detecting underground pipelines. Therefore, it is required to have good characteristics of no leakage and sealing. This characteristic is very important, Generally, the manufacturing of concrete manhole molds is professionally processed. The mold manufacturing scheme is drawn on the computer desk in advance and submitted to the manufacturer for manufacturing. Generally, the mold manufacturers have advanced equipment in cutting, welding and grinding, and then cooperate with skilled operators for processing, only when the molding die is made can it have good practicability.
混凝土檢查井模具生產出來的混凝土件在具體的施工上也是非常的方便的,用來連接的地下排水管道也是比較大,尤其是污水管道,管道內難免會有大量雜物的存在,管道太小的話非常那個容易發生堵塞,所以幾米高度的井體都有,施工單位要求的過高的井體都不是一體的,而是通過將多個預制件上下拼接到一起使用的,一般這種需要多套模具配合使用的都是帶有上下承接口,這樣整體檢查井的密封性才會更好的。
The concrete parts produced by the concrete inspection well mold are also very convenient in the specific construction. The underground drainage pipes used to connect are also relatively large, especially the sewage pipes. There will inevitably be a large number of sundries in the pipes. If the pipes are too small, they are very likely to be blocked, so the wells with a height of several meters have them, The excessively high well bodies required by the construction unit are not integrated, but are used by splicing multiple prefabricated parts up and down. Generally, those requiring multiple sets of molds are equipped with upper and lower bearing interfaces, so that the tightness of the overall inspection well will be better.